Interventions On The Cutting Deck; Removing, Sharpening And Reassembling The Blades - Stiga MPV 320W Workshop Manual

WORKSHOP MANUAL
MPV 320W / 520W
To reassemble the cutting deck, repeat the above
operations in the reverse order, taking care to
keep the forks lowered so as to ease the insertion
of the pivot arms.
WARNING!
springs on the forks, the assistance of an ad-
ditional person is required to keep them low-
ered to safe mode.

6.2.1 Removing, sharpening and reassembling the blades

WARNING!
gloves when handling the blades.
WARNING!
to each other; the rotation of each blade en-
gages the rotation of the other.
• Follow all steps of the "Verticalisation of the cut-
ting deck" [
1. Unscrew the four nuts (1) and remove the plate
(2) and the blade holder disc (3).
NOTEDo NOT unscrew the central nut (4) to re-
move the blade holder disc (2).
2. Turn over the blade holder disc (3) and loosen
the two nuts (5) to remove the blades (6).
6 - CUTTING DECK AND COLLECTION
- To counter the load of the

6.2 INTERVENTIONS ON THE CUTTING DECK

- Always wear protective
-The blades are connected
6.1.2].
Chapter
5
3
1
4
6 5
3
EDITION PAGE
2017 36 /
64
4
1
2
1
1
5
6