Drive Belt; Spare Parts - Stiga Park Series Instructions For Use Manual

Hide thumbs Also See for Park Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
Always use original spare parts. Using
non-original spare parts can result in
the risk of damage even if they fit in the
machine.
The blades are contra-rotating. This
means that there is a right blade and a
left blade. When replacing blades,
make sure that they are assembled cor-
rectly.
Assemble the blades in accordance with figure 15
where the blade tips are marked. The blade's fold-
ed up edge must be placed inwards towards the
blade fastener.
The cutting system consists of two blade bars, each
with two interchangeable blade tips Y (fig 16).
Both blade tips should be replaced at the same time
to avoid any imbalance.
Fit the new blade tips. Tighten the screws V and W
fully. Tightening torque: V - 9.8 Nm, W - 24 Nm.
And heavy impact can result in the blade tip being
folded aside. Loosen the locking nut X and turn the
blade tip back to its correct position. Mount a new
shear bolt V. Tighten the lock nuts X and Z.

DRIVE BELT

Both blades are driven inside the mowing deck by
a toothed drive belt.
If any of the blades have hit a solid object (e.g. a
stone), the belt tension can change. This means
that the drive belt can "miss-mesh", which in the
long term can damage the blades.
After a heavy impact, always check that
both blades are positioned at right an-
gles to each other (fig. 15).
The blades' respective work areas overlap one oth-
er. If the blades' positions in relation to one another
have been changed, there is a great risk that they
can impact each other. This results in serious dam-
age to the mowing deck.
If this is the case, take the machine with mowing
deck to a service workshop for repair and inspec-
tion.
ENGLISH

SPARE PARTS

STIGA original spare parts and accessories are
specially designed for STIGA machines. Note that
"non-original" spare parts and accessories have
not been inspected or approved by STIGA.
The use of such parts and accessories
can affect the function and safety of the
machine. STIGA can not be held re-
sponsible for damage/injury caused by
such products.
ACCESSORIES
For mowing close up to houses and garden walls,
the mowing deck can be equipped with support
rollers in the front edges to protect against damage.
PATENT - PROTECTION OF
This machine, or parts thereof, is protected by the
following patent and protection of design:
9902299-8 (SE), SE/00/01222 (PCT)
99 1161 (SE), 499 11 740.9 (DE), M1990 000734
(IT), 577 439-443 (FR), 115326 (US)
STIGA reserves the right to modify the product without
giving any prior notice.
GB
DESIGNS
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

107m

Table of Contents