Removing The Cutting Deck Flanged Supports - Stiga MPV 320W Workshop Manual

WORKSHOP MANUAL
MPV 320W / 520W

6.2.5 Removing the cutting deck flanged supports

• Follow steps 1 to 5 of the "Replacing the blade connection belt" procedure
[ 6.2.4].
The subsequent steps require accessibility from both the top and from the bottom of the cutting
deck.
WARNING!
as to ensure stability and safety when working.
1. Unscrew the four nuts (1) and remove the plate
(2) and the blade holder disc (3).
2. Unscrew the nut (4) and remove the entrain-
ment plate (5) together with the washer (6) be-
low.
3. Undo the three screws (7) fastening each
flanged support (8) to the cutting deck.
5
4
a) Removal of the drive pulley support
1. Unscrew the nut (1) and remove the pulley (2)
and the washer (3).
6 - CUTTING DECK AND COLLECTION
Place the cutting deck so that both sides are accessible, securing it so
6
Chapter
3
1
8
2
EDITION PAGE
2017 41 /
1
2
1
1
7
1
3
64