Stiga MPV 320W Workshop Manual page 2

TABLE OF CONTENTS
1 - INTRODUCTION............................................................................................3
2 - SERVICING RECOMMENDATIONS ..............................................................8
3 - TECHNICAL DATA .........................................................................................13
4 - ENGINE AND FUEL TANK .............................................................................15
5 - TRANSMISSION - WHEELS - STEERING .....................................................18
6 - CUTTING DECK AND COLLECTION ............................................................33
7 - ELECTRICAL SYSTEM ..................................................................................48
The purpose of this manual is to provide a complete set of instructions related to the servicing, maintenance,
disassembly, repair and installation of the mechanical components for models MPV 320W and MPV 520W.
All trained Servicing personnel must use this manual during all adjustment, disassembly and troubleshooting
activities.
IMPORTANT NOTE - The information contained herein is destined exclusively to the Service Centres and
professional operators, with the required expertise to perform, and use the correct equipment, all the opera-
tions described, with the objective of safeguarding machine performance and safety.
The Manufacturer is under no circumstances liable for any damage or injuries due to interventions performed
by private individuals or inadequate facilities.
This manual does not contemplate interventions and repair work on the engine and transmission units, as it
is necessary to contact the Service Centres of the respective Manufacturers or obtain documentation sup-
plied by the same.
The manual has left out the simplest and quickest operations that can be handled by a good mechanic, while
concentrating more on specific aspects with tips and advice on the best servicing procedures.
Please take the time to read through this manual to acquire a basic understanding of the machine, which is
necessary for working rationally without making errors or wasting time. All problems related to user proce-
dures are fully covered in the User manual.
All the information provided refers to the original versions of the machines, excluding therefore interventions
on machines which have been subject to modifications that have altered their characteristics or components.
All brands, names, logos and trademarks mentioned belong to their respective owners.
© by STIGA - No use of the illustrations or duplication, reproduction or translation, even partial, of the texts in
WORKSHOP MANUAL
MPV 320W - MPV 520W
EDITION 2017
INTRODUCTORY NOTES
this document may be made without explicit authorisation.