Servicing Recommendations; Transmission Unit Identification; Equipment Required; Basic Equipment - Stiga MPV 320W Workshop Manual

WORKSHOP MANUAL
MPV 320W / 520W

2.1.3 Transmission Unit identification

The machine is equipped with a transmission hydro-
static unit.
This unit is made by another manufacturer according
to precise technical specifications which differentiate it
from similar items by this same Manufacturer.
The transmission unit has a serial number (see trans-
mission manual) that clearly identifies the product and
its specifications; this number must always be quoted
when requesting spare parts or any information from
the Manufacturer.

2.2.1 Basic equipment

All the operations can be carried out with the tools normally available at any good car Servicing
Centre.
The availability of an adequate lifting platform for the weight and dimensions of the machine makes
it more practical to perform the interventions in the lower area of the machine.

2.2.2 Special equipment

No special tools or equipment are required to perform standard servicing operations.

2.3.1 Machine transportation

Pay utmost attention when loading the machine on or off a trailer or truck.
• Use the machine chassis to fasten it to the means of transport
• NEVER fasten it to bars or joints that could get damaged.
• DO NOT transport the machine with the equipment (if any) in the raised position.

2 - SERVICING RECOMMENDATIONS

2.2 EQUIPMENT REQUIRED

2.3 TRANSPORTATION AND HANDLING

Chapter EDITION PAGE
2017 9 /
64