System And Component Descriptions; Wiring - Stiga MPV 320W Workshop Manual

WORKSHOP MANUAL
MPV 320W / 520W
IMPORTANT - Disconnect the battery from the machine when performing Ohmmeter tests or
damage to the Ohmmeter may occur.
IMPORTANT - An ohmmeter reads the resistance of whatever component is connected between
the test leads. It can be used to check wires, coils, light bulbs, or any item that conducts current.

7.2.1 Wiring

The diagram shows the cabling layout and the arrangement of the utilities.
13
3
15

7.2 SYSTEM AND COMPONENT DESCRIPTIONS

8
7
2
1. General wiring
2. Fuse box and relays
3. Battery
4. Ignition unit
5. Headlight switch
6. PTO switch
7. Starter relay
8. Operator presence microswitch
9. Parking brake microswitch
10. Grass catcher tilting microswitch
11. Upper casing microswitch
12. Left bonnet microswitch
13. Grass catcher full warning microswitch
14. Grass catcher full warning signal device
15. Hour counter (if present)
Chapter
7 - ELECTRICAL SYSTEM
5 6
4
1
EDITION PAGE
2017 52 /
64
14
10
11
12
9