Stiga MPV 320W Workshop Manual page 42

WORKSHOP MANUAL
MPV 320W / 520W
4
6
2. Undo the three screws (4) fastening the sup-
port plate (5) to the drive pulley flanged sup-
port (6).
3. Remove the support plate (5), fixed by two
screws (7) on the right, two screws (8) on the
left and two front screws (9).
4. Remove the bracket (10) fixed by the screws
(11).
5. Unscrew the nut (12) and remove the lower
pulley (13) and the washer (14).
6. Locate and undo the three fixing screws and
release the flange support from the drive pul-
ley.
When reassembling, perform the operations de-
scribed above in the reverse order.
• Tighten the nuts (1) with a torque of 23-27 Nm.
b) Removal of the blade pulley supports
1. Unscrew the nut (1) and remove the toothed
pulley (2) and the washer (3).
2. Undo the three screws (4) fastening each
flanged support (5) to the support plate (6).
Chapter
6 - CUTTING DECK AND COLLECTION
7
7
5
9
9
5
6
14
12
13
2
1
EDITION PAGE
2017 42 /
64
8
8
11
10
5
4
3
6