Installation, Operation and Maintenance Manual
MDE 255 Rev. 0
Section 1: Introduction
The FF2000v4 rev. 3 is an electronic module that allows to connect the Bettis electrical actuator
XTE3000 to a F
it is controlled by a program stored internally, it works as a pure bus interface and does not affect the
actuator control integrity.
It is installed inside the actuator housing and the communication interface is powered directly from
the fieldbus. The data lines are fully isolated from the actuator electronics.
Introduction
™ Fieldbus serial communication line. The module has its microprocessor and
oundation
Section 1: Introduction
January 2022
1