Emerson Bettis XTE3000 Installation, Operation And Maintenance Manual page 56

Section 7: Resource Block
January 2022
34
35
36
37
Table 39.
Enumeration
0
1
2
52
MOTOR_TEMPERATURE
Type: SIGNED8
Size: 1 octet
Handling: READ
It is the current temperature of the motor. The motor temperature sensor is mounted
upon order.
SET_TORQUE_REFERENCE
Type: BOOLEAN
Size: 1 octet
Handling: WRITE
Default value: FALSE
The setting of this parameter allows to transfer the last torque profiles in the reference profile
registers of TORQUE_PROFILE. The old reference data are lost and the new ones are used as
new reference torque profile.
CLEAR_RECENT_DATA_LOG
Type: BOOLEAN
Size: 1 octet
Handling: WRITE
Default value: FALSE
The setting of this parameter allows to clear the counters related to the recent data in the
ACTUATOR_LOG.
The current date is memorized and can be viewed in MAINTENANCE_INFORMATION.
SET_SIGNATURE
Type: ENUMERATED
Size: 1 octet
Handling: WRITE
Default value: 0
The setting of this parameter allows transferring the last torque curve in the reference curve.
The old reference data are lost, and the new ones are used as new reference torque curve.
The possible actions are the following:
Installation, Operation and Maintenance Manual
Description
Uninitialized
Set close signature
Set open signature
MDE 255 Rev. 0
Resource Block