Indicator Status - HikRobot ID5000 Series User Manual

The RS-232 serial port wiring is shown below.

2.2 Indicator Status

Read the following section to get the indicator status of the device.
Device Status
Device is
powered on.
Power supply
exception.
Network
exception.
Device software
exception.
Device exception
Note
When the indicators are flashing slowly, its unlit interval is 1 s.
ID5000 Series Smart Code Reader
Device Power
RS-232 Serial Port
Output
RS-232 Serial Port
Input
Device Power
Ground
Figure 2-4 RS-232 Serial Port Wiring
Table 2-3 Description
PWR Indicator
Solid blue Solid green
Unlit
Solid blue Unlit
Solid blue Solid green
Solid blue Solid green
PWR
GND
LNK Indicator
Slow/fast
flashing yellow
Flashing yellow
Solid yellow
5
TX
RX
GND
ACT Indicator
U1 is unlit, and
U2 is slow
flashing blue.
U1 is unlit, and
U2 is slow
flashing blue.
U1 and U2 are
unlit.
U1 and U2 are
solid blue.
External
Device
U1/U2