HikRobot ID5000 Series User Manual page 4

● DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
● Make sure the plug is properly connected to the power socket.
Transportation
● The product contains precision optical components and electronic components. During
transportation, storage and installation, incorrect operations like heavy pressure and violent
vibration should be avoided. Otherwise, the product may be damaged.
● Avoid sudden collision, and pack the product with the accompanied carton and cushioning
material or similar package.
Using Environment
● Do not touch the heat-radiating part of the device to avoid scalding.
● In order to reduce the risk of fire or electric shock, do not let the product get wet or damp.
● Do not drop objects onto the product and avoid vigorous vibration.
● Keep the product away from magnetic interference.
● Do not use the product in extremely heat, extremely cold, dusty environment, corrosive
environment or high humidity environment.
● Do not aim the product lens at objects of strong light, such as the sun and incandescent lamp.
Otherwise, the lens may be damaged.
● The product should be stored in dry environment without corrosive gas. Avoid placing the
product in direct sunlight and poorly ventilated locations, or near heat sources such as heater or
heating (ignoring this warning may lead to fire hazards).
● Do not operate in explosive environment.
● Keep the surrounding area well ventilated to avoid heat accumulation. Do not contact the
radiator directly to avoid scald.
Electrostatic Protection
● Remove all conductive objects (such as jewelry, watch, etc.) on the product body before
touching the product, and touch the grounding metal bracket by hand to release the static
electricity.
● It is suggested to wear anti-static suit to prevent damage to the equipment caused by static
electricity.
● When installing or maintaining the product, please wear anti-static wrist band or anti-static
gloves. Make sure that the wristband is tightly attached to the skin and is reliably grounded.
● It is forbidden to touch exposed circuit boards with bare hands. Static electricity generated by
human body may damage electrostatic sensitive components on circuit boards.
● When touching electrostatic sensitive components or devices, proper grounding measures must
be taken.
● Put electrostatic sensitive components into anti-static bags for protection.
● It is suggested to place humidifier in dry environment to maintain suitable humidity and reduce
static electricity generation.
ID5000 Series Smart Code Reader
iii