User Set Customization - HikRobot ID5000 Series User Manual

7.9 User Set Customization

The Configuration Management module allows you to set and manage the user set. A user set is a
group of parameter values with all the settings needed to control the device, and you can save,
load and switch different user sets.
Save Settings
If you have set the device parameters as desired, you can save them into the user set. Go to
Config Management → Save Settings, and click UserSet1, UserSet2, or UserSet3 to save the
current device settings.
Load Settings
You can load the user set to restore the device to the saved group of parameter values again if
required. Go to Config Management → Load Settings, and click Default, UserSet1, UserSet2, or
UserSet3 to load settings.
Note
The Default refers to restore the device parameter settings to the factory ones.
Start Settings
The selected user set will be automatically loaded after the device being powered on. For
example, if you select Default, the device parameter settings will be restored to the factory
settings.
ID5000 Series Smart Code Reader
Figure 7-48 HTTP
59