Code Reading Settings - HikRobot ID5000 Series User Manual

Select ReadSuccess
If you select ReadSuccess as Line Out Activation Event, you can set its output delay time and
duration.
Line Out Delay Time
It sets the delay time for outputting the output signal.
Line Out Duration
It sets the time duration of the output signal.
Select LightStrobeLong
If you select LightStrobeLong as Line Out Activation Event, you do not need to set any
parameters.

7.7 Code Reading Settings

In Data Processing module, you can set filter rules for reading barcodes and other data processing
ID5000 Series Smart Code Reader
Figure 7-34 Select NoCodeRead
Figure 7-35 Select ReadSuccess
46