Set Data Processing - HikRobot ID5000 Series User Manual

Exclude Specific Character in Barcode
If this parameter is enabled, the device will only read the barcodes which exclude a specific
character. Otherwise, the barcodes will be filtered out. You can enter the specific character in
Character.
Regular Expression Filter Enable
If this parameter is enabled, the device will only read the barcodes which contain a specific
regular expression. You can enter the specific regular expression in Regular Expression Filter.
NoRead TimeOut
If the device does not read barcode information within this period, it will output NoRead.
Read Times Threshold
If the reading results of a barcode is same for the configured times, the barcode will be
regarded as valid and its reading result will be outputted. Or the barcode will be regarded as
invalid and its reading result will not be outputted.

7.7.2 Set Data Processing

Data processing allows you to set the contents contained in the outputted barcode information.
Note
● Data processing settings is only available when you set SmartSDK, TCP Client, TCP Server, Serial,
HTTP or FTP as the communication protocol. For details about communication protocol, see
section Communication Settings for details.
ID5000 Series Smart Code Reader
Figure 7-36 Set Filter Rule
48