Intended Use; Training Of Qualified Personnel; Additional Information - Festo YXCS Operating Instructions Manual

Additional information

2.2

Intended use

The product is intended for positioning tasks within machines or automated systems with a higher-
order controller.
The product is intended for use in industrial environments.
Permitted mounting position
Use the product only in the following mounting position.
Product
Single-axis system
Tab. 2: Permitted mounting position
Other mounting positions or overhead mounting of the product are not permitted.
2.3

Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can evaluate the work and
detect dangers. The qualified personnel have skills and experience in dealing with electropneumatic
(open-loop) control technology.
3 Additional information
– Contact the regional Festo contact if you have technical problems è www.festo.com.
– Accessories and spare parts è www.festo.com/catalogue.
Festo — YXCS — 2021-07b
Mounting position
X-module
–
Y-module
Horizontal
Z-module
–
5