Pictograms; Intended Use - Festo MPS 8046521 Getting Started

Programming module

2 Pictograms

This document and the hardware described herein include warnings about possible dangers which may
occur if the system is used incorrectly. The following pictograms are used:

3 Intended use

The stations, modules and components of the Modular Production System may only be used:

For their intended use in teaching and training applications

When their safety functions are in perfect condition
The stations, modules and components are designed in accordance with the current state of the art as well
as recognized safety rules. However, life and limb of the user or third parties may be endangered and the
components may be impaired if they are used incorrectly.
The learning system from Festo Didactic has been developed and produced exclusively for basic and further
training in the field of automation technology. The training company and/or trainers must ensure that all
apprentices observe the safety precautions described in this workbook.
Festo Didactic hereby excludes any and all liability for damages suffered by apprentices, the training
company and/or any third parties, which occur during use of the device in situations which serve any
purpose other than training and/or vocational education, unless such damages have been caused by Festo
Didactic due to malicious intent or gross negligence.
38
Warning
... means that non-observance may result in serious personal injury or material
damage.
© Festo Didactic 8046514