Application Of Adjusting Kit - Festo YXCS Operating Instructions Manual

Assembly
Flatness Dimension Y1 [mm]
£ 1000
[mm] 0.1
Tab. 7: Required evenness of the mounting surface
1. Determine the value of dimension Y1.
2. Check that the mounting surface has the required flatness and vertical alignment.
3. Prepare the mounting holes on the mounting surface in accordance with the product dimensions.
If necessary: move the adjusting kits and change dimension Y2 accordingly.
6.4

Application of adjusting kit

This chapter describes the basic application of the mounting component.
Mount and align the product: è 6.5 Product assembly.
2
1
12
11
10
9
8
Fig. 9: Adjusting kit for EHMY-LP-EGC
The screw 5 and its tightening torque are designed for mounting on steel.
Fig. 10: Not in scope of delivery
Select the screw aD for mounting the adjustment part suitable for the installation situation.
Strength class at least 8.8
14
1001 ... 2000 2001 ... 3000
0.2 0.3
1
3
2
4
3
5
4
5
6
6
7
8
9
10
7
11
12
13
13
14
14
3001 ... 4000
0.4
Mounting flange
Countersunk screw (2x)
Slot nut (2x)
Washer (4x)
Screw (4x)
Profile mounting (2x)
Screw (4x)
Screw
Adjusting part
Washer
Nut
Bolts
Washer (2x) for adjusting part
Screw M8 (2x) for adjusting part
Festo — YXCS — 2021-07b
4001 ... 5000
0.5