Product Assembly - Festo YXCS Operating Instructions Manual

Assembly
6.5

Product assembly

Requirements:
– The mounting surface is prepared.
– The required number of mounting attachments is pre-assembled on the Y-axis.
– Use only the supplied mounting components.
– The transportation kit for lifting the product is mounted.
– The moving parts are secured with the transportation locks.
6
Fig. 12: Product version with motor position on left, example
1
Energy chain
2
Support of the energy chain
3
Y-axis
20
4
Mounting component for adjusting kit
5
Slide with Y-Z adapter plate
6
Motor (optional)
Festo — YXCS — 2021-07b
1
2
3
4
5