Product Overview; Product Design - Festo YXCS Operating Instructions Manual

Product overview

4 Product overview
4.1

Product design

The illustrations in these operating instructions show examples of the product.
The actual product may differ from the illustrations.
The product consists of the Y-module EHMY-LP-EGC.
The Y-module moves customer-mounted attachments along the Y-axis.
The Y-module consists of the Y-axis with the electric drive. The motor position is configura-
tion-dependent.
The Y-Z adapter plate is located on the slide of the Y-axis for mounting attachment components.
The following components are located on the motor side:
– Energy chain
– Multi-pin plug for sensors (optional)
6
Fig. 1: Product version with motor position on left, example
1
Energy chain
2
Support of the energy chain
3
Y-axis
6
4
Mounting component for adjusting kit
5
Slide with Y-Z adapter plate
6
Motor (optional)
Festo — YXCS — 2021-07b
1
2
3
4
5