Festo YXCS Operating Instructions Manual page 16

Assembly
2. Loosen the screws on the profile mountings of the adjusting kits. Do not unscrew the screws.
3. Position the mounting flange on the mounting surface.
4. Place the washers under the screws.
5. Lightly secure the mounting flange to the mounting surface with the screws.
6. Tighten the screws evenly on the profile mountings.
EHMY-LP-EGC-...-KF
Screw size
Tightening torque
EHMY-LP-EGC-...-HD
Screw size
Tightening torque
16
50
M3 x 8
[Nm] 1.7
125
M5 x 16
[Nm] 5.9
80 120
M5 x 16 M8 x 20
5.9 20
160
Festo — YXCS — 2021-07b
185
220
M8 x 20
20