Yamaha MBK X-MAX 300 2017 Service Manual page 53

1. Cylinder head breather hose
2. Air filter case joint
3. Transmission case breather hose
4. Air filter case
A. Install the cylinder head breather hose with its
paint mark facing upward and completely onto the
hose fitting.
B. Fasten the hose with the clamp with its end facing
upward.
– –
C. 1 5 mm (0.04 0.20 in)
D. Point the ends of hose clamp to the rearward.
E. Fasten the hose with the clamp with its end facing
downward.
F. Install the cylinder head breather hose with its
paint mark facing to the right and completely onto
the hose fitting.
– –
G. 1 3 mm (0.04 0.12 in)
H. Route the cylinder head breather hose through the
guide on the air filter case joint.
I. Install the cylinder head breather hose with its
paint mark facing rightward and completely onto
the hose fitting.
– –
J. 5 6 mm (0.20 0.24 in)
2-30
CABLE ROUTING