Yamaha MBK X-MAX 300 2017 Service Manual page 51

1. Wire harness
2. Tail/brake light lead (right tail/brake light)
3. Tail/brake light lead (left tail/brake light)
4. License plate light lead
5. Frame
A. Route the wire harness through the hole in the rear
lower cowling assembly. Align the tape on the wire
harness with the hole.
B. Route the tail/brake light leads and license plate
light lead through the hole in the rear lower cowling
assembly. Align the tapes on the leads with the
hole.
C. Route the license plate light lead to the hole on the
frame.
D. Route the tail/brake light lead (left tail/brake light)
to the rear of the turn signal light lead and the front
of the rear lower cowling assembly.
E. Route the tail/brake light lead (right tail/brake light)
and license plate light lead through the guide.
F. Route the tail/brake light lead (left tail/brake light),
tail/brake light lead (right tail/brake light) and
license plate light lead between the frame.
2-28
CABLE ROUTING