Yamaha MBK X-MAX 300 2017 Service Manual page 37

1. Front brake hose (front brake master cylinder to
hydraulic unit)
2. Rear brake hose (rear brake master cylinder to
hydraulic unit)
3. Handlebar switch lead (left handlebar switch)
4. Throttle cable (decelerator cable)
5. Throttle cable (accelerator cable)
6. Handlebar switch lead (right handlebar switch)
7. Lower handlebar cover
A. Face the paint mark on the front brake hose (front
brake master cylinder to hydraulic unit) to the front.
B. Position the front brake hose (front brake master
cylinder to hydraulic unit) so that its projection
contacts the front brake master cylinder.
C. Position the rear brake hose (rear brake master
cylinder to hydraulic unit) so that its projection
contacts the rear brake master cylinder.
D. Route the throttle cables through the hole in the
lower handlebar cover.
2-14
CABLE ROUTING