Yamaha MBK X-MAX 300 2017 Service Manual page 16

TIP
After resetting the average fuel consumption, "_
_._" will be shown until the vehicle has traveled
1 km (0.6 mi).
Instantaneous fuel consumption display
1. Instantaneous fuel consumption display
This function calculates the fuel consumption
under current riding conditions.
The instantaneous fuel consumption can be dis-
played as either "Consumption_ _._km/L", "Con-
sumption_ _._L/100 km" or "Consumption_ _
_._MPG" (for the UK).
• "Consumption_ _._km/L": The distance that
can be traveled on 1.0 L of fuel under the cur-
rent riding conditions is shown.
• "Consumption_ _._L/100 km": The amount of
fuel necessary to travel 100 km under the cur-
rent riding conditions is shown.
• "Consumption_ _ _._MPG" (for the UK): The
distance that can be traveled on 1.0 Imp.gal of
fuel under the current riding conditions is
shown.
TIP
If traveling at speeds under 10 km/h (6 mi/h), "_
_._" is displayed.
Average speed display
1. Average speed display
The average speed "Average_ _ _kmh" or "Av-
erage_ _ _MPH" (for the UK) is displayed.
The average speed is the total distance divided
by the total time (with the main switch in the "ON"
position) since the display was last reset to zero.
This display shows the average speed since it
was last reset.
To reset the average speed display, select it by
pushing the "INFO" switch, and then push the
1
"INFO" switch for three seconds.
Warning message function
This function displays a warning message corre-
sponding to the current warning.
"L FUEL": Appears when the last segment of the
fuel meter starts flashing. If "L FUEL" is dis-
played, refuel as soon as possible.
"H TEMP": Appears when the top segment of the
coolant temperature meter starts flashing. If "H
TEMP" is displayed, stop the vehicle, then stop
the engine, and let the engine cool.
"ICE": Appears when the icy road warning indi-
cator " " starts flashing. If "ICE" is displayed, be
careful of icy roads.
"OIL SERV": Appears when the oil change indi-
cator "OIL" starts flashing. If "OIL SERV" is dis-
played, change the engine oil, and then reset the
oil change indicator and oil change tripmeter.
"V-BELT SERV": Appears when the V-belt re-
placement indicator "V-Belt" starts flashing. If "V-
BELT SERV" is displayed, replace the V-belt,
and then reset the V-belt replacement indicator
and V-belt replacement tripmeter.
When there are two or more warnings, the warn-
ing messages are displayed in the following or-
der:
L FUEL → H TEMP → ICE → OIL SERV →
VBELT SERV → L FUEL
1
1-7
FEATURES