Power Connectors; Table 18. E800 Iconnex Satellite Router Port Specifications - iDirect Evolution 8000 Series Installation And Safety Manual

Port specifications for the iCONNEX e800 Satellite Router are listed in

Table 18. e800 iCONNEX Satellite Router Port Specifications

Port Designator
J18
J2
J3
J5
J6
J7
J8 (left)
J8 (right)
J13
J4
JP1
JP2

5.2 Power Connectors

This section describes the details of the iCONNEX e800 Satellite Router power connectors. The
connectors include:
• iCONNEX e800 Satellite Router Remote ON/OFF Switch Connector
• iCONNEX e800 Satellite Router Remote LED Connector
• iCONNEX e800 Satellite Router DC Power Connector
iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
Port Name
Power MOLEX P/N 501844-1410 (mates with MOLEX P/N
Connector 51353-1400)
10 MHz BNC external 10 MHz connector (future use)
TX Out • F-Connector, female, 3/8", 32 thread
• 75 ohm nominal
• BUC Voltage: +24V or +48V (depending on input
voltage)
Note: The BUC voltage on the Tx connector is
RX Out • F-Connector, female, 3/8", 32 thread
• 75 ohm nominal
• DC blocked port with terminator
Rx in • F-Connector, female, 3/8", 32 thread
• 75 ohm nominal
• LNB Voltage: +18.8 VDC nominal at 500 mA maximum
USB Future use
Console RJ-45, serial, RS-232
Lan A RJ-45, 10/100 Base-T
Lan B RJ-45, 10/100 Base-T
RS232/GPIO HD-15, General Purpose Input/Output, serial
Remote MOLEX P/N 89400-0320 (mates with MOLEX part
ON/OFF number 87369-0300)
Switch
Remote LED MOLEX P/N 87831-2020 (mates with MOLEX part
Display number 87568-2063)
DESCRIPTION
approximately equal to the input voltage. For
example, if the input voltage is +48V,
approximately +48V is present at the TX
connector.
Power Connectors
Table 18.
45