Electrical Safety; Physical And Environmental Considerations - iDirect Evolution 8000 Series Installation And Safety Manual

2.2 Electrical Safety

Follow all warnings and cautions to ensure your safety and protect the equipment from
electrical hazards.
Follow these guidelines when you are working with any electrical equipment:
• Disconnect all power and external cables before installing or moving the equipment.
• Do not work alone when potentially hazardous conditions exist.
• Never assume that power has been disconnected; always check.
• Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe. Never install equipment that has signs of damage or mishandling.
• Carefully examine your work area for possible hazards, such as a wet floor, ungrounded
power extension cables, and missing safety grounds.

2.3 Physical and Environmental Considerations

To protect the equipment and to avoid personal injury, observe the following physical and
environmental considerations when installing an Evolution 8000 Series Satellite Router:
• Ventilation (applies to e8350 Satellite Router only)
Slots and openings on the e8350 Satellite Router provide ventilation and ensure reliable
operation of the product. To protect the e8350 Satellite Router from overheating, these
openings must not be blocked or covered at any time. Do not place this product in a built-
in installation, such as a bookcase or enclosed rack, unless proper ventilation is provided
or the manufacturer instructions have been followed. If there is any dust build-up on the
vent openings of the e8350 Satellite Router, vacuuming is recommended to remove these
particles to ensure proper airflow.
iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
WARNING/CAUTION
DANGER
The BUC power requirement must match the
Evolution 8000 Series Satellite
proper
Router
voltage. The BUC may sustain damage
if used with the incorrect power supply.
Do not work on the system, or connect or
disconnect cables, during periods of lightning
activity.
Electrical Safety
5