Power Specifications; Table 6. E800 Iconnex Satellite Router Power Specifications - iDirect Evolution 8000 Series Installation And Safety Manual

Table 5. e800 iCONNEX Satellite Router Mechanical and Environmental
Specifications (continued)
Category
Operational Vibration
(10 minutes per axis)
Operational Shock
Conformal Coating

3.2.2 Power Specifications

Ensure that the installation site can accommodate the power specifications for the iCONNEX
e800 Satellite Router as defined in

Table 6. e800 iCONNEX Satellite Router Power Specifications

Category
Input Voltage Range
DC Power F-Connector
Protection
Power Factor Correction
Efficiency
Input Transient Response
iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
iCONNEX e800 Satellite Router Specifications
Description
The iCONNEX e800 remains operational when exposed to 0.21 grms
with the following profile:
Frequency Slope
5 to 350 Hz 0
350 to 500 Hz -6 dB/octave
500 Hz 0
The iCONNEX e800 shall remain operational when exposed to 10g,
10ms half sine on x, y, z axis.
HUM/SEAL 1B73
Table 6.
Description
+24 VDC or +48 VDC
TX Out, +24 VDC, 3.5A maximum power supply to BUC or,
TX Out, +48 VDC, 3A maximum power supply to BUC
Internal, primary current fuse, inside power supply
Over current protection
Short protection
Complies with EN61000-3-2 and EN61000-3-3
86% typical
0.5 msec for 50% load change typical
PSD
0.0001 g2/Hz
0.00005 g2/Hz
13