4 Installing Your e8350
Satellite Router
This chapter describes the guidelines and procedures for installing the e8350 Satellite Router
at your VSAT location.
This chapter contains:
•
Tools and Supplies Required for Installation
•
Unpacking Your e8350 Satellite Router
•
Mounting the e8350 Satellite Router
•
Defining the e8350 Satellite Router Rear Panel
•
Preparing the Coax Cables
•
Connecting AC Power
•
Monitoring LED Status Indicators
•
Maintaining the Remote
•
Repacking the e8350 Satellite Router
Note: Thoroughly review all the information in
attempting any of the procedures in the chapter.
4.1 Tools and Supplies Required for Installation
Table 8
specifies recommended tools and supplies used when installing the e8350 Satellite
Router, and the tools are shown in
Table 8. Recommended Tools
Quantity Tool
1
1
1
1
1
1
iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
Number 2 Phillips screwdriver (for rack mounting)
F-Connector crimping tool
RG-6 coax stripper
Coax wire cutter
DB-9 to RJ-45 adapter
Straight-through LAN cable
Chapter 2, Safety
Figure 2
and
Figure
3,
Information, before
on page
18.
17