4.6
Evolution X5 Satellite Router Rear Panel
This section describes and illustrates the rear panel connectors. They are shown in
See
Table 8
Figure 5. Evolution X5 Satellite Router Rear Interface Connectors
Table 8. iDirect Evolution X5 Satellite Router Connectors
Label
+24V 5A
TX Out
RX In
CONSOLE
LAN A
Ground
iDirect Evolution X5 Satellite Router Installation and Safety Manual
for a description of each connector and indicator.
Connector Type
KyCon-KPJ4SS
75 ohm, F-Type
75 ohm, F-Type
RJ-45
RJ-45
4-40 mounting stud
Evolution X5 Satellite Router Rear Panel
Interface and Purpose
External +24VDC power supply
L-Band Transmit signal to Block UpConverter (BUC)
capable of 10 MHz Reference and +24 VDC, 3.5
Amps maximum power to BUC
L-Band receive signal, capable of 10 MHz Reference
and DC power to LNB
75 ohm, F-Connector female
RS-232 servicing serial connection console to PC or
laptop
Category-5 STP or UTP cable, 10/100
Base-T Ethernet LAN port connects the Evolution X5
Satellite Router to the customer LAN Hub/switch
chassis ground
Figure
5.
21