Rf Specifications; Table 4. E8350 Satellite Router Rf Specifications - iDirect Evolution 8000 Series Installation And Safety Manual

Table 3. e8350 Satellite Router Power Specifications (continued)
Category
Protection
Power Factor Correction
Efficiency
Input Transient Response
AC Input Connector
AC Power Cord

3.1.3 RF Specifications

Ensure that installation site can accommodate the RF specifications for the e8350 Satellite
Router as defined in

Table 4. e8350 Satellite Router RF Specifications

Category
Frequency Range
Frequency Tuning Step Size
RF Power Range
RF Power Adjustability
Typical Transmit and Receive
Phase Noise (dBc/Hz) at:
Typical Phase Jitter at
iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
Description
Internal, primary current fuse, inside power supply
Over current protection
Short protection
Complies with EN61000-3-2 and EN61000-3-3
86% typical
0.5 msec for 50% load change typical
IEC-320-C14
18 AWG, country dependent
Table 4.
Description
Transmit: 950-2000 MHz
Receive: 950-2000 MHz
Transmit: 38 Hz
Receive: Sub-Hertz with demodulator
Transmit: -35 dBm to +5 dBm
Receive: -65 dBm to +0 dBm composite
Transmit: 0.5 dB nominal step size
Receive: Under AGC for all valid Rx input power range
Frequency
1 KHz
10 KHz
100 KHz
1 MHz
≤ 1.8° rms
14 KHz to 1 MHz:
e8350 Satellite Router Specifications
Phase Noise
-83
-83
-96
-112
11