Rf Specifications; Table 7. E800 Iconnex Satellite Router Rf Specifications - iDirect Evolution 8000 Series Installation And Safety Manual

iCONNEX e800 Satellite Router Specifications

3.2.3 RF Specifications

Ensure that the installation site can accommodate the RF specifications for the iCONNEX e800
Satellite Router as defined in

Table 7. e800 iCONNEX Satellite Router RF Specifications

Category
Frequency Range
Frequency Tuning Step Size
RF Power Range
RF Power Adjustability
RF Power Output Stability
Typical Transmit and Receive
Phase Noise (dBc/Hz) at:
Typical Phase Jitter at
10 MHz BUC/LNB Reference
Level
Transmit Frequency Stability
(after Downstream Carrier Lock)
Remote to Remote (w/OCXO):
Hub with RCM and External GPS:
Transmit Carrier Suppression
Discrete Spurs, Harmonics and
Nonharmonics
14
Table
Description
Transmit: 950-2000 MHz
Receive: 950-2000 MHz
Transmit: 38 Hz
Receive: 333 KHz (coarse) with demodulator CRL tracking
-35 dBm to +5 dBm (recommend ≥ -10 dBm)
Transmit:
Receive: -65 dBm to +0 dBm composite
Transmit: 0.1 dB Step Size nominal in SCPC mode
0.5 dB Step Size nominal ins Star/Mesh mode
Receive: Under AGC for all valid Rx input power range
+/- 1 dB
Frequency
1 KHz
10 KHz
100 KHz
1 MHz
≤ 1.8° rms
14 KHz to 1 MHz:
+1dBm, +/- 3 dB
Track with hub frequency stability
+/- 0.3 ppm
Equivalent to external GPS reference
Hub with RCM Only: +/- 0.03 ppm
Hub without RCM: +/- 0.002 ppm
≥ 30 dBc
≥ 50 dBc, with output ≥ -15 dBm
iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
7.
Phase Noise
-83
-83
-96
-112