Rf Specifications; Table 2-3. Rf Specifications - iDirect Evolution X7 Installation, Support, And Maintenance Manual

Category
Protection
AC Input Connector
AC Power Cord
DC Input Connector
Efficiency
2.3

RF Specifications

The Evolution X7 Satellite Router RF specifications are listed in
Category
IF Interface, Impedance
Frequency Range
Tuning Step Size
RF Power
Tx SSB Phase Noise
LNB Support
Receiver Noise Figure
Installation, Support, and Maintenance Guide
Evolution X7 Satellite Router
Table 2-2. Power Specifications (continued)
Description
Over-Voltage Protection for LNB and BUC DC
Over-Current Limiting for LNB and BUC DC
Options 1 & 2: Primary AC fuse within PS module (250 VAC, T6.3 A)
Option 3: Primary DC fuse within PS module (250 V, 16 A)
IEC-60320-C14, 3-cond, Male
Supplied, per country of use
Self-capturing terminal block, 14-16 AWG
87% Min

Table 2-3. RF Specifications

Description
Type "F", Zo = 75 ohms
Transmit 950 - 1950 MHz
Receive 950 - 2150 MHz
Transmit 10 Hz
Receive 55 KHz
Transmit -35 to +5 dBm, 0.5 dB step
Receive, Minimum -130 + 10Log(Sym rate) dBm (Single carrier)
Receive, Maximum -5 dBm (Wideband Composite)
Frequency
1 KHz
10 KHz
100 KHz
1 MHz
Fsym > 10 Msps: DRO LNB
Fsym < 10 Msps: PLL LNB (internal reference)
Fsym > 1 Msps: Universal LNB w/22 KHz tone
15 dB
Table
Phase Noise
-75
-85
-95
-105
RF Specifications
2-3.
5