Delta Electronics Elevator Drive VFD-VL User Manual page 139

Chapter 4 Parameters|
08-03 Rated Speed of Motor (rpm)
Control
FOCPM
mode
Settings
It is used to set the rated speed of the motor and need to set according to the value indicated
on the motor nameplate.
08-04 Number of Motor Poles
Control
FOCPM
mode
Settings
It is used to set the number of motor poles (must be an even number).
08-05 Rs of Motor
Control
FOCPM
mode
Settings
08-06 Ld of Motor
Control
FOCPM
mode
08-07 Lq of Motor
Control
FOCPM
mode
Settings
08-08 Reserved
08-09
Angle between Magnetic Field and PG Origin
Control
FOCPM
mode
Settings
This function is used to measure the angle between magnetic field and PG origin.
08-10
Magnetic Field Re-orientation
Control
FOCPM
mode
Settings
4-84
0 to 65535
2 to 96
0.000~65.535Ω
0.0~6553.5mH
0.0~360.0°
0 Disable
1 Enable
Factory setting: 1710
Factory setting: 4
Unit: 0.001
Factory setting: 0.000
Factory setting: 0.0
Factory setting: 0.0
Factory setting: 360.0
Factory setting: 0
Revision Nov. 2008, VLE1, SW V1.03
Unit: 1
Unit: 0.1
Unit: 0.1
Unit: 0.1