Pump Connector; J5 - Gauge Connector - Agilent Technologies TwisTorr 305 FS User Manual

Technical Information

Pump Connector

A five-meter long cable is available to connect the controller to the pump. The
following figure shows the controller output connector configuration where pins:
A-F = pump temperature sensor

B-C-D = 75 Vac 3-phase output to pump motor stator

E = EARTH PROTECTION

Figure 37 Controller-to-Pump Connector
J5 – Gauge Connector
This connector is available to connect the Agilent active gauges.
Figure 38 Gauge Connector
186 Agilent TwisTorr 305 FS Remote Controller User Manual