Agilent Technologies TwisTorr 305 FS User Manual page 237

Technical Information
START OUT MODE: Selects the operating mode of the START output. Possible

options:


SPEED OUT MODE (KRPM/Hz): permits selection of the unit of measurement of

the speed of rotation shown on the display of the controller.
This setting acts only on the measurement shown on the display.
Possible options:


LCD CONTRAST

Agilent TwisTorr 305 FS Remote Controller User Manual
RUNNING: the output is active when the pump is driven
STARTING: the output is active only during acceleration ramp-up.
KRPM
Hz
237