Table of Contents
Advertisement
Accessories
CAUTION
28
Modules
Agilent 8157xA Modular Attenuator can be hosted by:
• Agilent 8163A and Agilent 8163B Lightwave Multimeters,
• Agilent 8164A and Agilent 8164B Lightwave Measurement Systems,
• Agilent 8166A and Agilent 8166B Lightwave Multichannel Systems.
User's Guides
Description
Agilent 8157xA Modular Attenuator User's Guide (English).
Agilent 8163A/B Lightwave Multimeter, Agilent 8164A/B Lightwave Mea-
surement System, & Agilent 8166A/B Lightwave Multichannel System Us-
er's Guide.
Agilent 8163A/B Lightwave Multimeter, Agilent 8164A/B Lightwave Mea-
surement System, & Agilent 8166A/B Lightwave Multichannel System Pro-
gramming Guide.
Connector Interfaces and Other
Accessories
Optical power levels above 100 mW applied to single mode connectors can easily damage
the connector if it is not perfectly clean. Also, scratched or poorly cleaned connectors can
destroy optical connectors mechanically. Always make sure that your optical connectors are
properly cleaned and unscratched before connection. Refer to chapter "Cleaning
Information" on page 77 on appropriate procedures for connector cleaning and inspection.
However, Agilent Technologies Deutschland GmbH assumes no responsibility in case of an
operation that is not compliace with the safety instructions as stated above.
Agilent 81570A, 71A, 76A, 77A & 78A Variable Optical Attenuators, Eigth Edition
User's Guides
Modules
Part No.
81570-90A01
08164-90B14
08164-90B63
Advertisement
Table of Contents
