Centurion D3 Installation Manual page 39

Fault Finding Guide Continued...
PROBLEM
False Collision Detection
(STATUS light could flash
4 times to indicate that
number of collisions have
exceeded COLLISION
COUNTER feature value. Wait
60 seconds, or remove &
reapply all power to reset
operation.) (Continued)
POSSIBLE CAUSES & SOLUTIONS TO PROBLEM
! Check that the sensor wire
into
the CP80 (master controller) into the DOSS sensor.
DOSS sensor
!
Check that the
housing.
! If the problem is not solved replace the DOSS sensor and
main controller (CP80).
Note:
Red/Black/Orange Wire = Origin Switch
and
Red/Black/Purple Wire = DOSS Sensor
Page 39
harness is securely plugged
is securely clipped into the