Lubrication; Lubrication Requirements - Centurion D3 Installation Manual

Lubrication (D5 only) Lubrication (D5 only)
The D3 is factory lubricated and therefore requires no additional attention.
ATTENTION
The D5 does not require routine oil changes. However in the event of the unit losing oil due to
stripping down or mechanical damage, the correct replacement oil is EP75W90 to API (GL5)
specification.
If the gearbox is bolted down in the horizontal position during filling, the correct level is reached when
the oil level is in the flat section of the dip stick. Emptying the 80ml bottle of oil provided will provide
sufficient lubrication.
WARNING
Figure 8 Fill the Gearbox with Lubricant
In order to prevent possible leakage during shipping, the D5 is
shipped with no oil inside the gearbox
EP 75W90 oil is included with the product, and this
BEFORE operating the product.
DO NOT ATTEMPT TO RUN THE D5 OPERATOR WITHOUT
FIRST FILLING THE GEARBOX WITH LUBRICANT.
Upright detail removed for clarity.
Page 16
. A bottle containing 80 ml of
Put Oil
In Here
Oil Specifications:
GRADE:75W90
QTY: 80ml
Oil Filling Procedure
1. Lift the cover off the
operator.
2. Remove the battery so
that you can gain
access to the filler plug.
3. Remove the oil filler cap
by levering it out with a
screwdriver.
4. Empty contents of
supplied oil bottle into
the gearbox.
5. Refit the oil filler cap.
MUST be added