Engagement Speed Check; Parking Brake Adjustment - Yamaha VK10L Manual

DRIVE V-BELT/ENGAGEMENT SPEED CHECK/

PARKING BRAKE ADJUSTMENT

a
6. Measure:
• Drive V-belt circumference a
Out of specification → Replace.
V-belt circumference:
1,129 ~ 1,137 mm (44.4 ~ 44.8 in)

ENGAGEMENT SPEED CHECK

1. Place the machine on a level surface of hard-
packed snow.
2. Inspect:
• Clutch engagement speed
Inspection steps:
• Start the engine, and open the throttle lever
gradually.
• Check the engine speed when the machine
starts moving forward.
Out of specification → Adjust the primary
sheave.
Engagement speed:
2,200 ~ 2,600 r/min
PARKING BRAKE ADJUSTMENT
1. Measure:
• Parking brake cable distance a
Out of specification → Adjust.
Parking brake cable distance:
43.5 ~ 46.5 mm (1.713 ~ 1.831 in)
2. Adjust:
• Parking brake cable
Adjustment steps:
• Loosen the locknut 1.
• Turn the adjuster 2 in or out until the specified
distance a is obtained.
Turning in → Distance a is increased.
Turning out → Distance a is decreased.
• Tighten the locknut.
13
INSP
ADJ