Technical Specifications - Strong SRT 8208 User Manual

Problem
The receiver switches
off or to standby
automatically.
Forgotten PIN code/
password.
Forgotten channel lock
code.
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially on
HD content.
The USB storage device is
not working properly.
Recording is no longer
possible.
The receiver automatically
switches off after a certain
time.

9.0 TECHNICAL SPECIFICATIONS

Demodulator:
Demodulator:
Transmission mode:
Video Decoder:
Profile level:
Video resolution:
Decoding:
Aspect ratio:
Media Center:
Audio Decoder:
Audio support:
Sampling rate:
Audio mode:
Media Center
* Dolby Digital Plus, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
Possible cause
The Auto Standby function is
enabled and has reached the set
time.
Always make a note of the Password
you have set.
The read/write speed of your USB
device could be too low.
The power consumption is too high. Connect an extra power supply
The USB device is formatted
incorrectly.
The selected storage medium is full. Delete existing recording(s).
The Auto Standby function is
enabled.
COFDM; 16 QAM/64 QAM; QPSK; 256QAM
2 K - 8 K
HEVC (H265)
AVC/H.264HP@L4.1, MPEG-4 ASP supported
576i, 576p, 720p, 1080i, 1080p
PAL
4:3 Letterbox, 4:3 Pan & Scan, 4:3 Fullscreen, 16:9 Pillarbox
16:9 PanScan 16:9 Fullscreen
MP4, MKV, MPEG2 (TS).
Dolby Digital Plus*/AC3+/PCM
MPEG MusiCam Layer II
32, 44.1, 48 KHz
Stereo, Mono, Multi-Audio
MP3 fixed and VBR, WAV.
What to do
Disable Auto Standby. Refer to the
user manual of your receiver for
details.
Contact your local Service Hotline
or send an email to our Support via
www.strong.tv
Contact your local Service Hotline
or send an email to our Support via
www.strong.tv
Make sure to use a USB storage
device with sufficient speed and
space. Pen drives ('USB sticks') may
not support sufficient speed.
adapter to your USB HDD device.
Format the USB device on a PC to
FAT32.
Attach and use another storage
medium.
Check the Auto Standby setting and
disable if necessary.
19