Language; Av Setting - Strong SRT 8208 User Manual

Manual Search
Antenna Power
FTA

7.5 Language

This menu allows you to set up your language preferences.
Language:
First Audio:
Second Audio:
Subtitle Language:

7.6 AV Setting

Use this menu to match your receiver to your TV set.
The following settings are available:
Video Resolution
576i:
576p:
720p:
1080i:
1080p:
Aspect Mode:
16:9 Fullscreen
4:3 Letterbox
4:3 Pan Scan
4:3 Fullscreen
channels and favourite list(s) will be deleted. The new-found channels will be
installed in the channel list and afterwards you can create a new favourite list
if you like. Press OK to start the scan.
Select a particular channel to do a search on just one (known) frequency.
Select Start Search and press OK to start the scan. The signal quality bar might
be useful to check if the frequency is indeed in use.
Set to On if you use an active antenna. When set to On, 5 V will be present at
the ANT IN connector of the receiver. Select Off for passive antennas.
FTA Free to Air, Select between Yes which will only install Free-to-Air channels
or No which will install all found channels, even if they are scrambled. Then
select Auto Search or Manual Search to start scanning.
Use t u to select the language for the On Screen Display (OSD).
Use t u to select the audio language you like to hear as first priority, if
available.
Use t u to select a language that will be played when the language selected
at First Audio isn't available.
Use t u to select the preferred subtitle language.
If the video quality does not appear correctly, change the setting. These
settings match the most common settings for HDMI.
For analogue TVs (on Scart connection).
For digital SD TVs (some digital TVs do not support this mode).
For digital HD TVs (on HDMI connection).
For digital HD TVs (on HDMI connection).
For digital HD TVs (on HDMI connection).
Select the aspect ratio that matches your TV. This is either a 4:3 or a 16:9
possibility. Select in combination the preferred conversion method how to
show a 16:9 programme on a 4:3 TV, or a 4:3 programme on a 16:9 TV. The
options are:
A 4:3 programme will be show full screen on a 16:9 screen, with sideways
stretched content.
The full 16:9 programme will be displayed on your 4:3 TV set with black bars
above and below the picture
A centre cut-out of the 16:9 programme will be displayed full-screen on your
4:3 TV, missing content to the left and right.
A 16:9 programme will be compressed sideways on a 4:3 TV, to show a full
picture without any black bars
13