Table of Contents
Advertisement
4. !
5. AUDIO
6. SUB
7. PG+/PG-
8. EPG
9. TEXT
10. MENU
11. EXIT
12. pq
13. t u
14. OK
15. GOTO
16. FAV
17. TV/R
18. RECALL
19. 0~9
20. 4
21. u
22. 2/TIMESHIFT
23. 5 6
24. 7 8
25. COLOURED BUTTONS
26. ZOOM
27. ASPECT
28. V.F.
29. TIMER
2.5 Installing the batteries
Open the cover on the remote control and insert 2x AAA type batteries into the compartment. Observe
correct polarity of the batteries when inserting. A terminal diagram is shown inside the compartment.
1. Remove the cover.
2. Insert the batteries.
3. Place the cover.
2.6 Using the remote control
To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.
NOTE:
6
Mutes audio output of the receiver
Shows list of Audiotracks, for the current channel.
Shows list of subtitled languages, for the current channel.
Page up/down and 10 channels steps in channel list mode
Shows the EPG (Electronic Programme Guide) in TV mode
Shows Teletext on OSD (On Screen Display)
Opens the main menu. In menu you will get one step back
Exits from the menu or sub-menu. Exits any action initiated.
Menu Off: Change channel to previous/next. Menu On: Moves the highlight
up/down.
Menu Off: Increases/decreases the volume level. Menu On: Change settings
for specific Menus
Menu Off: Displays the current channel list. Menu On: Activates the
highlighted menu item. Confirms actions initiated.
While in playback, select a time to jump to.
Favourite group selection
Toggles between TV or RADIO mode
Back to previous shown channel
Channel selection or value input
Records the TV programme to the connected storage device
Start Playback of Timeshift
Activates the Timeshift function
Fast rewind/Fast forward
Previous/Next item in Multimedia.
For Editing in menu, Multimedia and Teletext functions. Follow on screen
suggestions. Combined on coloured buttons:
No function
Change Subtitle format in movie play.
No function
See an overview and/or edit the timer schedule
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver) and
the remote control. Direct sunlight or very bright light can reduce or disturb
the reception of the remote control signals.
Fig. 4
Fig. 5
Advertisement
Table of Contents
