Amber Sd-Power Led - Vidicode V-Tap ISDN PRI Manual

The Blue LED blinks when data is stored during recording.
Blue LED blinking.
•
The Blue LED is on to indicate that audio data is stored. In other
words, recording is active, so a file is opened on the SD card and
data is written to it.
Also during Wi-Fi initialization, the Blue LED can blink shortly.

4.4 Amber SD-Power LED

The Amber LED shows the status of the SD card.
Amber LED steady ON.
•
This indicates that an SD card is inserted and is ready to be used
by the system.
Amber LED blinking short (Red LED OFF).
•
This indicates that an SD card is inserted, and the system is
reading data from a file during sending with the Tunnel
function.
Amber LED blinking fast (Red LED ON): SD card ERROR.
•
A read- or write-error happened on the SD card or the SD card
is not usable by the system. The card must be removed and
checked.
V-Tap ISDN PRI Manual EN v1.3 Okt 2018 © 2018 Vidicode 33