Call Recorder Voip On The Pc - Vidicode V-Tap ISDN PRI Manual

2.2.2
The Call Recorder VoIP software for the PC can also receive Tunnel data
from the V-Tap ISDN, convert this data into audio files and store the files
into its own database. The CR-VoIP software can also receive multiple
data streams from different V-Tap units simultaneously.
To setup the CR-VoIP software to accept connections from a V-Tap, go to
Options, Setup, Recording tab and enable as is shown below:
NOTE1: The PC's IP address is the "Tunnel Server Address" in the V-Tap.
NOTE2: Be sure that the PC's firewall is open for TCP port 2016, the
default "Tunnel Destination Port" in the V-Tap unit.
NOTE3: Be sure the Encryption password is the same as the
"Encryption Password" in the V-Tap unit.
NOTE4: The CR-VoIP software does not need licenses to receive from
the V-Tap unit.
The Call Recorder VoIP software for the PC has its own manual and is
therefore further not described in this manual.
V-Tap ISDN PRI Manual EN v1.3 Okt 2018

Call Recorder VoIP on the PC

© 2018 Vidicode 9