Blue Data Led; Amber Sd-Power Led - Vidicode V-Tap ISDN BRI Manual

The link to the Tunnel server is OK.
When start/stop with the button is selected and no Tunnel is
configured, it means that recording is active.
Green LED OFF.
•
The only normal situation with the Green LED OFF is, when no
Tunnel server is defined in the settings and an SD card is
inserted.
When start/stop with the button is selected and no Tunnel is
configured, it means that recording is NOT active.

4.3 Blue Data LED

The Blue LED blinks when data is stored during recording.
Blue LED blinking or steady ON.
•
The Blue LED is on to indicate that audio data is stored. In other
words, recording is active, so a file is opened on the SD card and
data is written to it.
Also during Wi-Fi initialization, the Blue LED can blink shortly.

4.4 Amber SD-Power LED

The Amber LED is used to show the status of the SD card and power.
Amber LED steady ON.
•
This indicates that an SD card is inserted and is ready to be used
by the system.
Amber LED blinking short (Red LED OFF).
•
This indicates that an SD card is inserted, and the system is
reading data from a file during sending with the Tunnel
function.
Amber LED blinking fast (Red LED ON): SD card ERROR.
•
A read- or write-error happened on the SD card or the SD card
is not usable by the system. The card must be removed and
checked.
V-Tap ISDN BRI Manual EN v2.21 April 2021 © 2017-2021 Vidicode 27