Shelf / Water Pan Installation - VWR INCU-Line Premium Instruction Manual

The INCU-Line ILCO 180 is stackable. You can stack two units with the stacking adaptor and save place in the laboratory.
Stacking adaptor
Base on castors
3.2.

Shelf / water pan installation

The unit is equipped with a rack for shelves.
Perform the following steps to assemble the rack for shelves, water pan and adjust shelf height:
1) Install the part (a) of the rack as close as possible the right wall of the chamber.
2) Install the part (b) of the rack as close as possible the left wall of the chamber.
3) Connect the part (a) with the connecting rod (c). Note: the pin of the rod must be directed towards the door.
4) Connect the part (b) with the connecting rod (c). Note: to lock the connecting rod rotate the pin downwards.
11
vwr.com I Instruction manual VWR
b
®
CO incubator
2
c
a