The electric installation should meet the following conditions:
The device is powered by AC 230V/50Hz. Please connect it to a socket with ground in order
to avoid electric shocks in case of the unit's failure.
3.1. Installation of shelves
Perform the following steps to adjust shelf height:
1
3
1) Install the shelf holder at the selected height by inserting it into proper slots on wall.
2) Install the second shelf holder on the opposite wall.
3) Slide the shelf into the shelf holders.
4) Done!
To remove a shelf, perform the above steps in reverse order. To remove the shelf holder from the slots, lift
it up and slide it towards the rear of the chamber.
Instruction Manual DL, VL, IL
2
4
Page 10 / 49