Shelf Installation - VWR INCU-Line Series Instruction Manual

•
Not designed to be built-in e.g. within a wall cavity
•
Placed near a mains socket 230V/50Hz.
Non-compliance with the above recommendations may result in damage to the unit or impair tech-
nical parameters.
The unit has been equipped with levelling feet. Please use them to level the unit after it has been placed in
its final location.
The INCU-Line 56PR and INCU-Line 112PR models are stackable. You can stack 2x IL 56 PR, 2x IL 112PR
and you can also place the IL 56PR on top of the IL 112PR. The IL 240PR models are not stackable.
The electric installation should meet the following conditions:
The device is powered by AC 220-240V/50Hz. You must be connected to an earthed
mains socket.
The electric installation should be secured by a 16 A ant surge fuse.

3.1 Shelf installation

Perform the following steps to adjust shelf height:
1
3
Instruction Manual INCU-Line Peltier Cooled
2
4
Page 9 / 33