Name And Description Of Analyzer - Fuji Electric ZPAJ Instruction Manual

2.2 Name and description of analyzer

(1) Power switch
POWER
O
TN 1
(8) Terminal Block 1
(13) Communication interface
Name
(1) Power switch Used for ON/OFF the analyzer.
(2) Display/operation Liquid crystal display and keys
panel for setting various functions.
(3) Purge gas inlet For connecting to the purge gas
tube.
(4) Sampling gas inlet For connecting to the measuring
gas tube.
(5) Sampling gas For connecting to the exhaust
outlet line.
(6) Fuse Fuse inside
(7) Power For connecting to the power
inlet
supply line.
INZ-TN2ZPAJ-E
(2) Display/operation panel
(9) Terminal Block 2
(11) Terminal Block 4
TN 2 TN 3 TN 4 TN 5
(12) Terminal Block 5
(10) Terminal Block 3
Fig. 2-1
Description
MODE ZERO SPAN
ESC ENT
(5) Sampling gas outlet
(4) Sampling gas inlet
(3) Purge gas inlet
FUSE
250V T 2A L
POWER INLET
100-240V AC
(7) Power inlet
(6) Fuse
Name
(8) Terminal block 1
(9) Terminal block 2
(10) Terminal block 3
(11) Terminal block 4
(12) Terminal block 5
(13) Communication
interface
3
< Front panel >
< Rear panel >
Description
For the analog output
For the signal input from O
2
analyzer and the contact input
For the contact input and the
contact output
For the contact output
For the alarm output
RS-232C