Table of Contents
Advertisement
6.3 Alarm setting
6.3.1 Setting of alarm values
ENT
key.
Note
Set the values so that H-limit value > L-limit
value and that (H-limit value - L-limit value)
> hysteresis.
For the case of reverse range O
Set the values so that L-limit value > H-limit
value for the reverse range O
When "0" is set, the alarm operation is not
performed.
To close the "Alarm Setting"
To close the "Alarm Setting" or to cancel this
mode midway, press the
A previous screen will return.
Setting range
0% to 100% FS (Settable in each range).
INZ-TN2ZPAJ-E
key. Press
or
ENT
key.
measurement:
2
measurement.
2
ENT
key.
ESC
key.
35
Cursor for setting value
End of Alarm Setting
ENT
(
)
500.0
5000
(
)
ENT
5000
ENT
(
)
Advertisement
Table of Contents
